No Alcohol Markers? No Problem — Colouring the Scottish Highlands Stag with Pencil Crayons
Join the Cozy Creative Community
Romantic reading journals, paper crafts, vintage inspiration, grandmacore aesthetics, printable collections, and gentle creative living delivered straight to your inbox.
Join readers, journalers, crafters, and vintage souls creating a softer, more beautiful life.
Well, hello, my lovely friends. If you came from Pinterest for the gold paperclips dressed up with roses, lace and tiny charms, you’re in the right place. A few ribbon scraps and one little paper flower are enough to turn an ordinary clip into a bookmark worth giving.

This vintage floral version was inspired by Becky Conley. See her original project in the Design Team feature, or watch Becky make her bookmarks.
If you’d like patterned scraps for the little tails, you can browse the printable papers at MGT Printable Treasures on Etsy. Even a narrow offcut from another project will do.
With love,
Tracy
Well, hello, my lovely friends. If you came from Pinterest for the gold paperclips dressed up with roses, lace and tiny charms, you’re in the right place. A few ribbon scraps and one little paper flower are enough to turn an ordinary clip into a bookmark worth giving.

The pin originally led to Becky Conley’s Design Team feature. You can still see her project there. This tutorial shows how to recreate the floral clips pictured in the pin.
If you’d like patterned scraps for the little tails, you can browse the printable papers at MGT Printable Treasures on Etsy. Even a narrow offcut from another project will do.
With love,
Tracy
Well, hello, my lovely friends. If you came from Pinterest for the gold paperclips dressed up with roses, lace and tiny charms, you’re in the right place. A few ribbon scraps and one little paper flower are enough to turn an ordinary clip into a bookmark worth giving.

The pin originally led to Becky Conley’s Design Team feature. You can still see her project there. This tutorial shows how to recreate the floral clips pictured in the pin.
If you’d like patterned scraps for the little tails, you can browse the printable papers at MGT Printable Treasures on Etsy. Even a narrow offcut from another project will do.
With love,
Tracy
There is something lovely about giving an overlooked object a new purpose—especially when it ends up beside a favourite stack of books. Our design team member Becky Conley of BC Designs has shared a new project, Tea for Two Bookend with MGT Printable Treasures, using our Blue Hydrangea collection.
I love seeing the different directions our designers take with the same printable artwork. This time, Becky has taken it beyond the journal page and into a bookend project, bringing her love of repurposing to a bookish corner.
A little gold, a beautiful bookmark, and a gloriously full tassel—this is the sort of finishing touch that makes a reading accessory feel like a special gift. For this project I used the Romantasy Fall bookmarks and turned coordinating sticker designs into little hand-coloured charms.
The project has two parts. First we print and finish the bookmarks. Then we make the charms and put together a layered tassel with lace, fibres and strands of seed beads.
Open the bookmark file and print at actual size, or 100%, to keep the intended proportions. Check the preview before printing: turning on “fit to page” can change the finished size. Choose the paper setting that matches your cardstock and allow the ink to dry completely before handling the surface.
Use a paper trimmer for the long straight edges, or a ruler and scissors if that is what you have. Follow the outside edge of each bookmark and keep the decorative border even. If you would like a backing, add a thin layer of coordinating paper now and let the adhesive dry flat before continuing.
Run a gold marker carefully along the cut edges and pick out a few border details. Work lightly so the metallic finish complements the artwork. Let it dry fully.
Foil is another lovely option. Use foil with the adhesive or transfer method specified for that product; ordinary foil will not simply stick to an inkjet print. Make a small test first, particularly if the finished piece will go through a hot laminator. Keep bulky embellishments out of the laminating pouch.
Punch a centred hole near the top, leaving a sturdy bridge of material above it. Position it far enough in to pass through the cardstock and laminate, rather than relying on the thin clear border alone. Keep it clear of the main artwork. A narrow cord loop will pass through this hole, so it only needs to be large enough for your chosen attachment.
We used the coordinating sticker designs to create a black-and-white line-art image. I placed the shrink film over that image and traced the motifs onto the film. The sword, book and rose, lantern, crown and celestial designs all make lovely little accents.
Use the side and drawing materials specified for your film. Shrink ratios vary, so make one test charm before deciding on the size for a whole batch. You want the finished charms small and light enough to sit comfortably beside the bookmark.
I coloured the traced images with pencil crayons, using shades that worked with the bookmarks. Keep the colouring fairly light at first: it becomes more concentrated when the film shrinks. Leave the hand-coloured texture visible—that is part of the charm of making them yourself.
Cut around each motif, leaving a little space around delicate details and rounding sharp corners. Leave a sturdy tab where the cord will attach and punch the hole now. Both the design and the hole shrink, so check the hole size on your test piece before making the remaining charms.
I used a heat tool to shrink my coloured pieces. Use this method only if your shrink-film instructions allow it. Work on a heat-resistant surface in a ventilated area, keep the hot tool away from paper and tassel fibres, and use a suitable tool to stop the lightweight piece from blowing away. Follow the film manufacturer's heating instructions rather than a fixed time or distance.
The film may curl as it shrinks. Let it finish shrinking and settle as directed, then allow it to cool before handling. If the product instructions call for flattening, do that with the recommended tool and method. Attach cords only after the charm has cooled completely.
I attached the cooled charms to the little cord loops used for phone dangles. Pass the fine loop through the charm hole, then pass the rest of the attachment through the loop and pull gently to secure it. If your attachment needs a jump ring, use a small smooth ring that fits without forcing the hole. Check that each charm hangs freely.
For the full tassel, gather a generous mix of ivory lace, dusty rose and plum fibres, copper or rust ribbon, muted olive accents and a few fine antique-gold strands. Mix widths and textures: lace gives softness, ribbon gives body, and fine fibres fill the gaps.
For a tassel around 4 inches long, begin with strips roughly 9–10 inches long so there is room to fold, bind and trim. This is a starting point, not a required measurement; adjust it to suit your bookmark. Lay the strips together with their centres aligned and keep adding until the bundle looks satisfyingly full without becoming too heavy.
Tie a strong hanging cord securely around the midpoint. Fold the bundle in half over that tie, then bind the folded bundle a short distance below the top to form the tassel head. Wrap firmly several times, knot securely and tuck the ends into the fibres. Spread the lace and ribbons so the colours are visible all around, then trim the ends into a soft, slightly varied fringe.
Thread a few short strands of seed beads in plum, amber and antique gold. Use cord suited to the bead holes and secure both ends with appropriate knots or findings so the beads cannot slide off. Tie the strands into the tassel beneath the wrapped neck, leaving them visible between the lace and fibres. Keep them short enough to avoid dragging below the tassel.
Secure the phone-dangle charm loops at the top of the tassel or around its neck, placing the charms where they can be seen against the softer fibres. Use just a few so they remain accents rather than weighing the whole tassel down.
Pass the tassel's narrow hanging loop through the bookmark hole, then pass the tassel through that loop to make a gentle lark's-head attachment. If the bundle is too thick to pass through, use a suitable connecting ring or tie the hanging cord securely instead. Give each attachment a gentle check.
Keep the bookmark flat between the pages and let the tassel and charms rest outside the book. The finished effect is richly layered: gold-edged autumn artwork, soft lace and fibres, tiny seed beads and your own hand-coloured charms.
The finished hero image was created from my bookmark artwork and charm photographs, with my planned full tassel digitally added because the remaining supplies had not arrived in time. The process photographs show my printed bookmarks and hand-coloured shrink-film work.
Find the coordinating printables in My Grandma’s Teacups on Etsy, and join our newsletter for more paper-crafting inspiration.
Affiliate disclosure: I may earn a commission if you purchase through these links, at no extra cost to you.
For a little extra shimmer, The Crafter’s Workshop Champagne Gold 6 × 6 Foil Transfer Sheets can be used with double-sided adhesive or the tacky-when-dry medium specified for the foil. Try a narrow adhesive border on a scrap of cardstock first.
For a separate heat-foiling method, consider Gina K Designs Fuse Foiling Gel and the Gina K Designs White Fuse Foiling System. The gel is applied through a stencil and allowed to dry before foiling with the Fuse system. Use foil confirmed compatible with that system and follow the product instructions. The Champagne Gold sheets above are described for adhesive transfer; compatibility with the Fuse gel and machine has not been confirmed. The Fuse is an optional foiling tool, not a required supply for this project. A gold marker is still a simple finishing option.
Affiliate links: I may earn a commission from purchases through these links, at no extra cost to you.
Both products were listed as out of stock when checked on November 6, 2026. Check current availability; a suitable paper glue or double-sided tape you already own can be used instead.
Affiliate link: I may earn a commission if you purchase through this link, at no extra cost to you.
The Stamperia Create Happiness Paper Trimmer at A Cherry On Top includes separate cutting and scoring blades, imperial and metric measurements, and an extendable measuring arm. It is an option for straight paper cuts and scored folds; follow the tool’s instructions and check its supported material thickness. Use a suitable craft knife for chipboard. Listed as in stock when checked on November 6, 2026; availability may change.
Shop the Romantasy Fall collection on Etsy for the printable artwork used in this bookmark project.
Save your favourite angle for a future creative afternoon. The styled finished-project concepts show the planned full tassel; the charm image uses the original hand-coloured pieces.



Turn a printable dragon wing into a dramatic dimensional bookmark with raised burgundy membranes, antique-gold wing bones, jewel accents and a handmade beaded tassel.
The completed bookmark measures approximately 3 inches wide by 6 inches long, excluding the tassel.
Find More Romantasy Printables
Explore fantasy reading journals, bookmarks, ephemera, and coordinated bookish designs.
Visit MGT Printable Treasures on EtsyPrint the dragon-wing sheet on 8.5 × 11-inch US Letter paper using these settings:
Do not select Fill Page. That setting can enlarge the design and change the intended bookmark dimensions. Matte presentation paper or smooth white cardstock will produce the richest colour and cleanest detail.
Allow the ink to dry completely before cutting.
The piece marked 1 BASE supports the entire bookmark.
For a sturdier result, glue the uncut base wing to heavier cardstock before cutting it out. Spread a thin, even layer of glue across the back, press it onto the cardstock and smooth from the centre outward.
Place the piece beneath a heavy book until completely dry to prevent curling or bubbling.
Cut around the pale dashed line surrounding the base wing. Then cut out the groups marked:
Use small detail scissors for the curves and pointed wing tips. A craft knife can help with narrow interior spaces, but it is optional. The dark outlines and layered construction will disguise minor cutting differences.
Place each membrane piece face down on a soft surface. Gently run a bone folder, stylus or rounded tool along the centre without pressing hard enough to crease the paper.
Curve the outer edges slightly upward with your fingers. The goal is a soft natural curve rather than a sharp fold.
Position each burgundy membrane over its matching section on the base wing. Test the placement before applying adhesive. The gold ribs printed on the base should remain visible around the membranes.
Choose one of these attachment methods:
Avoid thick foam adhesive. The bookmark should remain slim enough to sit comfortably between book pages.
Position the piece marked 3 GOLD RIBS over the membrane sections. The long ribs should follow the natural divisions between the burgundy panels.
Apply narrow foam-tape pieces behind the thickest parts of the gold framework. Use precision glue behind the delicate tips and narrow ribs. Work from the top joint downward, checking the alignment as you go.
Allowing a few sections to remain slightly raised will make the gold framework look more like carved antique metal.
Attach the pieces marked 4 ACCENTS last. These may include:
Use tweezers and tiny dots of glue to position the smallest pieces. Place the dragon-head armour near the top joint where the long ribs meet.
This optional step makes the layered paper look more polished. Run a burgundy marker lightly around the exposed edges of the membrane pieces. Use a metallic-gold marker around the gold framework and decorative armour.
Test both markers on scrap cardstock first so you know how quickly the ink flows.
Locate the small attachment circle at the bottom of the base wing and create the opening with a ⅛-inch hole punch.
If the area feels fragile, reinforce the back with a small circle of clear tape or matching cardstock before punching. Keep the reinforcement small so it remains hidden.
Cut an 8–10-inch length of burgundy embroidery cord, waxed cord or thin satin cord. Fold it in half so the two loose ends meet. The folded end will form the attachment loop.
Push the folded loop through the bookmark hole from front to back. Pull approximately one inch of the loop through the hole, pass both loose ends through it and tighten gently.
This creates a neat lark’s-head knot without requiring glue.
Thread both loose cord ends through the beads in this order:
Tie a small knot beneath each bead for visible spacing. For a compact stacked appearance, slide all three beads together and tie one firm knot directly beneath the burgundy jewel.
If the bead holes are too small for both cord ends, thread one end through the beads and keep the second cord beside it. Tie the ends together below the final bead. Add a tiny dot of clear jewellery glue to the knot if the cord is slippery.
Place the tassel loop between the two cord ends. Tie a firm double knot around the tassel loop, then trim the excess cord while leaving short tails so the knot cannot slip open.
To use a dragon charm, attach it with a small jump ring and jewellery pliers. You can also combine a central tassel with a charm hanging slightly lower.
Allow all glue to dry completely. If desired, protect the surface with several very light coats of clear matte paper sealer.
Do not laminate the completed layered bookmark because lamination will flatten the raised pieces. For extra strength, laminate only the base before adding the dimensional layers.
Check every point and edge, adding a tiny amount of glue wherever a layer feels loose.
Place the flatter lower section between the pages. Allow the pointed upper portion and beaded tassel to extend beyond the top or bottom of the book.
Because the design is dimensional, avoid pressing it inside an extremely tight hardcover. It is especially well suited to reading journals, planners and books with a little space near the spine.
Every finished dragon wing will look slightly different depending on how you curve the membranes, position the armour and arrange the beads. Those individual details are what give it its handmade Romantasy character.
Continue Your Romantasy Adventure
Discover coordinated reading journals, printable crafts, bookmarks and fantasy-inspired collections.
Shop MGT Printable TreasuresWe're looking for a small group of product testers who love printables, reading, and journaling. Try our digital collections free — just leave an honest review when you're done.

Choose a favourite image to save for your next creative afternoon.
AI-created pin illustrations accompany this article; follow the written tutorial for the project details.


Affiliate disclosure: I may earn a commission from purchases through this link, at no extra cost to you.
For an optional alternative to a metallic marker, try The Crafter’s Workshop Champagne Gold Foil Transfer Sheets at A Cherry On Top. Use small pieces with double-sided adhesive or the tacky-when-dry medium specified for these sheets. Test on scrap cardstock and add the foil to flat pieces before assembling raised layers. These adhesive-transfer sheets do not require a foiling machine.
Affiliate link: I may earn a commission from purchases through this link, at no extra cost to you.
Scrapbook Adhesives 3D Foam Squares White Mix at A Cherry On Top includes 217 white double-sided foam squares in regular and small sizes. Use them to lift selected decorative paper layers on cards or other dimensional projects. Raised embellishments should sit outside a book’s pages; keep the portion of a bookmark that goes between pages flat. Listed as in stock when checked on November 6, 2026; availability may change.
Midnight Vanity Journal Tutorial
Draw the design yourself with the cheat sheet—or cut out the printable pieces and build the page without drawing every detail.
The finished spread may look elaborate, but you do not need to be an experienced illustrator to make it. I created two ways to complete this project, so you can choose the method that feels most enjoyable and accessible.
Keep the one-page Gold Marker Journal Shapes sheet beside you while you work. It demonstrates how to build the frames, title labels, rating stars, writing lines, progress trackers, and simple filigree, one small shape at a time.
Print the coordinating cut-out sheet, trim around the frames and decorations, then glue them directly into your journal. This is ideal if drawing is not your favourite part, if you have limited hand strength or fine-motor control, or if you simply want a faster project.
Open your journal to a clean two-page spread. With a white chalk pencil and ruler, divide the spread into four large rectangles. Leave room around the page edges and beside the centre binding.
Lightly shade the upper-left and lower-right boxes with an oxblood or burgundy pencil. Leave the other two boxes black. Apply the colour gently so the black paper still shows through and creates a deep velvet effect.
Use your ruler and fine-tip gold marker to outline each box. Add a second line just inside the first. Finish the corners with small curls, leaves, dots or diamonds. Choose one simple corner motif and repeat it instead of trying to make every corner different.
Draw a long rectangle at the top of each review box. Clip the corners, then add a second inner outline. Leave the centre blank for the book title.
Draw five outlined stars beneath each label. Add four or five writing lines with a ruler. In the lower corner, arrange ten small circles around a crescent moon to make a reading-progress tracker.
Begin with a simple curved S-line. Add two leaves, a few dots and one small diamond. Repeat the motif around the page or beside the centre binding. Keep the actual fold free of ink so the marker does not crack or transfer.
Print the cut-out sheet on US Letter paper at 100% or Actual Size. Do not choose “Fill Page,” because that may enlarge the pieces and crop the outer edges.
You do not need to use everything on the sheet. Select the frames, labels, roses, moons, stars, and filigree that fit your journal. Cut around the pale outlines, leaving a narrow border if you prefer a sticker-like appearance.
Place the pieces on the open pages and move them around until the spread feels balanced. Make sure the title areas, writing spaces, and progress trackers remain easy to use.
Attach the large frames first, followed by the title labels. Add roses, corner ornaments, moons, and stars last. Use a thin, even layer of glue so the paper does not ripple.
Add book titles with a gold marker or white gel pen. Fill in the rating stars after finishing each book, write a short review, and colour one tracker circle whenever you reach your chosen reading goal.
If you love oxblood roses, black lace, moonlit reading pages, and antique-gold details, visit MGT Printable Treasures for more bookish printables and journal designs.
Visit MGT Printable Treasures on EtsyChoose the drawing method when you want a relaxing creative exercise and a page made completely by hand. Choose the cut-and-paste method when you want the ornate look more quickly or need an easier alternative to detailed drawing. You can also combine them: glue down the main frames, then use your gold marker to add stars, lines, and personal flourishes.
However you build it, the goal is not perfect symmetry. It is to create a beautiful reading page that feels like it belongs to you—and makes recording your books feel a little more magical.
We're looking for a small group of product testers who love printables, reading, and journaling. Try our digital collections free — just leave an honest review when you're done.

Enjoy bookish paper crafting? Join the My Grandma’s Teacups newsletter for more creative project ideas.
Visit Our Sister Site
Gentle wellness reflections, emotional healing, creative recovery, and soft living inspiration for women rebuilding beautiful lives.
A World Outside My WindowHelpful links from my kitchen-table creative business:
Hey, I think you’d like how simple everyday banking can be with Simplii Financial™. Use my link and you can earn when you open and use an eligible account with Simplii™. Conditions apply.
Simplii Financial referral link
Explore Rakuten Cash Back — my referral link (U.S. site). Offers and eligibility vary; terms apply.
Some links may be referral links, which means I may receive a reward if you sign up through them. Thank you for supporting my work.